The general drive in the solar energy technology industry has been
towards the development of higher solar cell efficiencies and lowered
manufacturing costs, but are there other avenues of improvement worth
exploring? Such as the development of ultra-thin, ultra-lightweight
solar cells? That’s exactly what new research from MIT is suggesting —
that the development of extremely thin, lightweight solar cells has the
potential to completely revolutionize the industry.
Such extremely thin and lightweight solar cells have the potential to greatly surpass “any substance other than reactor-grade uranium” with regard to the energy produced per pound of material. According to the researchers, such solar cells could be created by utilizing stacked sheets of one-molecule-thick materials such as graphene or molybdenum disulfide.
The new approach “pushes towards the ultimate power conversion possible from a material” with regard to solar energy,” according to Jeffrey Grossman, the Carl Richard Soderberg Associate Professor of Power Engineering at MIT, and senior author of the new study.
The researchers say that even utilizing just a single bilayer of two-dimensional materials — such as graphene, molybdenum disulfide, molybdenum diselenide, etc — it’s possible to create solar cells
with efficiencies of 1-2%. While that may not sound like much at first
when compared to conventional solar cells, when you consider the
resources, time, and materials that go into making conventional solar
cells (as well as the space they take up and their weight) and compare
that to a solar cell that is thousands of times lighter, uses
considerably less material, and is lighter than tissue paper… the appeal
of the technology becomes obvious. As of now, the two-layer solar cell
design is about 1 nanometer thick — hundreds of thousands of times
thinner than a conventional silicon solar cell.
Potential applications in the aviation and space industries
immediately come to mind — or really anywhere weight is a significant
factor.
It’s worth noting that by stacking together more than just two layers of the two-dimensional materials that the efficiency could likely be raised significantly.
“Stacking a few layers could allow for higher efficiency, one that competes with other well-established solar cell technologies,” says Marco Bernardi, a postdoc in MIT’s Department of Materials Science, and lead author of the research paper.
“Pound for pound the new solar cells produce up to 1,000 times more power than conventional photovoltaics. At about one nanometer (billionth of a meter) in thickness, it’s 20 to 50 times thinner than the thinnest solar cell that can be made today,” Grossman adds. “You couldn’t make a solar cell any thinner.”
“In addition, the material itself is much less expensive than the highly purified silicon used for standard solar cells — and because the sheets are so thin, they require only minuscule amounts of the raw materials.” And the material itself is also very robust, even in open air — “it’s essentially stable in air, under ultraviolet light, and in moisture,” Grossman states.
While all of this already looks very promising, there’s actually still a great deal of unexplored potential, as the materials used — molybdenum disulfide and molybdenum diselenide — are just two in a universe of 2-D materials. “There’s a whole zoo of these materials that can be explored,” Grossman states. “My hope is that this work sets the stage for people to think about these materials in a new way.”
As is nearly always the case with this type of research, though, there are still roadblocks to be passed before this technology can be widely used — as of now, there are no methods for the large-scale production of molybdenum disulfide and molybdenum diselenide.
The researchers will now be working on the development of a prototype of the solar cell.
The new research was just published in the journal Nano Letters.
http://cleantechnica.com/2013/06/28/ultra-thin-solar-cells-1000-times-more-powerful-than-conventional-pv-per-pound/
“The
MIT team found that an effective solar cell could be made from a stack
of two one-molecule-thick materials: Graphene (a one-atom-thick sheet of
carbon atoms, shown at bottom in blue) and molybdenum disulfide (above,
with molybdenum atoms shown in red and sulfur in yellow). The two
sheets together are thousands of times thinner than conventional silicon
solar cells.”
Image Credit: Jeffrey Grossman and Marco Bernardi
Image Credit: Jeffrey Grossman and Marco Bernardi
Such extremely thin and lightweight solar cells have the potential to greatly surpass “any substance other than reactor-grade uranium” with regard to the energy produced per pound of material. According to the researchers, such solar cells could be created by utilizing stacked sheets of one-molecule-thick materials such as graphene or molybdenum disulfide.
The new approach “pushes towards the ultimate power conversion possible from a material” with regard to solar energy,” according to Jeffrey Grossman, the Carl Richard Soderberg Associate Professor of Power Engineering at MIT, and senior author of the new study.
It’s worth noting that by stacking together more than just two layers of the two-dimensional materials that the efficiency could likely be raised significantly.
“Stacking a few layers could allow for higher efficiency, one that competes with other well-established solar cell technologies,” says Marco Bernardi, a postdoc in MIT’s Department of Materials Science, and lead author of the research paper.
“Pound for pound the new solar cells produce up to 1,000 times more power than conventional photovoltaics. At about one nanometer (billionth of a meter) in thickness, it’s 20 to 50 times thinner than the thinnest solar cell that can be made today,” Grossman adds. “You couldn’t make a solar cell any thinner.”
“In addition, the material itself is much less expensive than the highly purified silicon used for standard solar cells — and because the sheets are so thin, they require only minuscule amounts of the raw materials.” And the material itself is also very robust, even in open air — “it’s essentially stable in air, under ultraviolet light, and in moisture,” Grossman states.
While all of this already looks very promising, there’s actually still a great deal of unexplored potential, as the materials used — molybdenum disulfide and molybdenum diselenide — are just two in a universe of 2-D materials. “There’s a whole zoo of these materials that can be explored,” Grossman states. “My hope is that this work sets the stage for people to think about these materials in a new way.”
As is nearly always the case with this type of research, though, there are still roadblocks to be passed before this technology can be widely used — as of now, there are no methods for the large-scale production of molybdenum disulfide and molybdenum diselenide.
The researchers will now be working on the development of a prototype of the solar cell.
The new research was just published in the journal Nano Letters.
http://cleantechnica.com/2013/06/28/ultra-thin-solar-cells-1000-times-more-powerful-than-conventional-pv-per-pound/
No comments:
Post a Comment